Insulation Material DUPONT KALADEX® PEN FILM DUPONT MELINEX® POLYESTER FILM "MIKI" INSULATION PAPERS DUPONT MYLAR® POLYESTER FILM DUPONT NOMEX® BRAND PAPER &POLYIMIDE FILM 3 LAYERS COMPOSTIE DUPONT NOMEX® BRAND PAPER &POLYIMIDE FILM 3 LAYERS COMPOSTIE DUPONT NOMEX® BRAND PAPER "TOYO" VULCANIZED FIBRE FLAME-RETARDING SILICONE RUBBER TUBE HRAT-SHRINK TUBE SILICONE FIBER GLASS BRAID TUBES FLAME-RETARDING SILICONE RUBBER BRAIDED TUBE Motor CARBON BRUSH SPRING STAMPING Fittings MOTORS

"MIKI" INSULATION PAPERS 　　　　　　　　　　　　　　"MIKI" insulation papers (pressboard class 2, Coil Insulating paper Class 2 & LD-Board) are high grade insulation material with 100% imported kraft wood pulp usedfor wide insulation field. Main Types: 　　Pressboard Class 2(PB-2): principal Applications: Electirc motors, transformers, ringsflanges, spacers, gaskets, capacitors, etc, Available colors are brown, red, green. 　　Coil Insulating Paper Class 2(PI-2): Principal applications: Speaker coil paper, cableraping, capacitors, etc. 　　LD-Board: This is a Non-pressed low density frbre paper. It is used when high densityis not required. 　　Other insulation papers include "BASE DDP", wrinkling coil paper for transformers and"Senkaski" paper for Speaker coil.   Red Press Board Class 2 (PB-2 Red) Properties Unit Value Thickness mm 0.40 0.50 0.80 1.00 Density g/m3 1.15~1.20 1.15~1.20 1.15~1.20 1.15~1.20 Basis Weight g/m3 450~480 575~600 920~960 1150~1120 Tensile Strenght MD Mpa ≥70 ≥70 ≥70 ≥70 XD Mpa ≥30 ≥30 ≥30 ≥30 Elongation MD Mpa ≥2.0 ≥2.0 ≥2.0 ≥2.0 XD Mpa ≥5.0 ≥5.0 ≥5.0 ≥5.0 Dielectric Breakdown Strength Ave. Kv/mm ≥7.0 ≥7.0 ≥7.0 ≥7.0 Min. Kv/mm ≥6.5 ≥6.5 ≥6.5 ≥6.5 Availability                                             Colour:red                                                 (PB2)(JISC-2305) Pressboard Class 2 Thickness Thickness Density Tensile Strenght Elongation mm mm g/cm3 Mpa %       MD CD MD CD   JIS standard JIS standard JIS standard JIS standard JIS standard JIS standard 0.13 0.120~ 0.140 0.13 0.95~ 1.30 1.10 ≥70 160 ≥35 35 ≥1.5 2.5 ≥4.0 8.5 0.18 0.166~ 0.194 0.18 0.95~ 1.30 1.10 ≥70 160 ≥30 35 ≥1.5 2.5 ≥4.0 8.5 0.25 0.230~ 0.250 0.25 0.95~ 1.30 1.10 ≥70 140 ≥30 38 ≥1.5 2.5 ≥4.0 8.5 0.38 - 0.38 - 1.10 - 160 - 35 - 2.5 - 8.5 0.50 0.460~ 0.540 0.50 0.95~ 1.30 1.10 ≥70 140 ≥30 38 ≥1.5 2.5 ≥4.0 8.5 0.80 0.744~ 0.856 0.80 0.95~ 1.30 1.10 ≥70 140 ≥35 38 ≥1.5 2.5 ≥4.0 8.5 1.00 0.930~ 1.070 1.00 0.95~ 1.30 1.10 ≥70 140 ≥35 38 ≥1.5 2.5 ≥4.0 8.5 1.60 1.488~ 1.712 1.60 0.95~ 1.30 1.10 ≥70 140 ≥35 38 ≥1.5 2.5 ≥4.0 8.5                           Moisturecontent Ash content Dirlectric break down stength Shrinkage % % Kv/mm %     Ave Min MD CD TD JIS standard JIS standard JIS standard JIS standard JIS standard JIS standard JIS standard ≥10.0 7.0 ≥1.0 0.5 ≥9.0 10.5 ≥6.5 9.4 ≥1.0 0.4 ≥2.0 1.4 ≥8.0 6.0 ≥10.0 7.0 ≥1.0 0.5 ≥9.0 10.2 ≥6.5 9.2 ≥1.0 0.4 ≥2.1 1.4 ≥8.0 6.0 ≥10.0 7.0 ≥1.0 0.5 ≥9.0 9.2 ≥6.5 8.5 ≥1.0 0.4 ≥2.2 1.4 ≥8.0 6.0 ≥10.0 8.5 ≥1.0 0.5 - 10.2 - 9.2 ≥1.0 0.4 - 1.4 - 6.0 ≥10.0 8.5 ≥1.0 0.5 ≥9.0 9.2 ≥6.5 8.5 ≥1.0 0.4 ≥2.4 1.4 ≥8.0 7.0 ≥10.0 8.5 ≥1.0 0.5 ≥7.0 9.2 ≥5.0 8.5 ≥1.0 0.4 ≥2.5 1.4 ≥8.0 7.0 ≥10.0 8.5 ≥1.0 0.5 ≥7.0 9.2 ≥5.0 8.5 ≥1.0 0.4 ≥2.6 1.4 ≥8.0 7.0 ≥10.0 8.5 ≥1.0 0.5 ≥7.0 9.2 ≥5.0 8.5 ≥1.0 0.4 ≥2.7 1.4 ≥8.0 7.0                         Mpa=N/mm2   (PI2)(JISC-2304) Coil Insulation Paper Class 2 Thickness Thickness Density Tensile Strenght Elongation mm mm g/cm3 Mpa %       MD CD MD CD   JIS standard JIS standard JIS standard JIS standard JIS standard JIS standard 0.05 0.045~ 0.055 0.05 0.60~ 0.85 0.75 ≥45 95 ≥15 17 ≥1.5 2.0 ≥2.7 3.0 0.063 - 0.063 - 0.75 - 95 - 17 - 2.0 - 3.0 0.08 0.072~ 0.088 0.08 0.60~ 0.85 0.75 ≥45 100 ≥15 20 ≥1.5 2.0 ≥2.7 4.0 0.10 0.090~ 0.110 0.10 0.60~ 0.85 0.75 ≥45 100 ≥15 20 ≥1.5 2.0 ≥2.7 4.0 0.13 0.120~ 0.140 0.13 0.60~ 0.85 0.80 ≥45 120 ≥15 17 ≥1.5 2.5 ≥2.7 8.0 0.18 0.166~ 0.194 0.18 0.60~ 0.85 0.80 ≥45 110 ≥15 20 ≥1.5 2.5 ≥2.7 8.0 0.25 0.230~ 0.270 0.25 0.60~ 0.85 0.80 ≥45 100 ≥15 20 ≥1.5 2.5 ≥2.7 8.0 0.38 0.350~ 0.410 0.38 0.60~ 0.85 0.80 ≥45 90 ≥15 25 ≥1.5 2.5 ≥2.7 8.0 Moisturecontent Ash content Dirlectric break down stength Shrinkage % % Kv/mm %     Ave Min   JIS standard JIS standard JIS standard JIS standard JIS standard ≥8.0 5.5 ≥1.0 0.4 ≥5.5 9.5 ≥4.0 7.5 ≥5.0 -1.0 - 4.0 - 0.4 - 9.5 - 8 - -1.0 ≥8.0 4.0 ≥1.0 0.4 ≥5.5 9.2 ≥4.0 8 ≥5.0 -1.0 ≥8.0 4.0 ≥1.0 0.4 ≥5.5 8.7 ≥4.0 7.5 ≥5.0 -1.0 ≥8.0 6.0 ≥1.0 0.4 ≥5.5 8.0 ≥4.0 7.5 ≥5.0 -1.0 ≥8.0 6.0 ≥1.0 0.4 ≥5.5 7.8 ≥4.0 7.3 ≥5.0 -1.0 ≥8.0 6.0 ≥1.0 0.4 ≥5.5 7.8 ≥4.0 7.3 ≥5.0 -1.0 ≥8.0 6.0 ≥1.0 0.4 ≥5.5 7.0 ≥4.0 6.2 ≥5.0 -1.0                 Mpa=N/mm2

Address: C-609,No.1296 West Ganjiang Road Suzhou City,Jiangsu,P.R.China,215004 Tel: +86-512-68263015      Fax: +86-512-62656201      E-mail: sales@kcmyoo.com